Resin Silicone Molds Earbuds Case and Phone Stand Epoxy Casting Craft Kit



Color: clear Some material ( such as clay, paste etc. ) may extend a bit when pull out of the mold. Suffer temperature: -40 to 230 centigrade/ -40 to 446 Fahrenheit. Dishwasher/oven/refrigerator safe. Food safe, BPA/PVC/phthalate free. Wash and boil before use, especially for food. Cavity smaller than 1cm is not good for chocolate use or require higher technique. Tips for using with fondant/sugar paste/clay 1 Rub tiny bit of shortening/oil into mold to avoid sticking 2 Press modelling clays/sugar paste into mold 3 Turn the mold over and carefully peel it back, allowing the piece to come out on its own. It will help shapes keeping. More Tips to use with Epoxy Resin: 1) Poured in silicone molds in layers, allowing air bubbles completely escape; 2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven. 3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard. 4) Do not use water-base ink for resin casting. 5) After baking clay / resin in complex or deep molds release the finished product under running water with soap. 6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.
Package Dimensions ‏ : ‎ 18.01 x 10.79 x 4.8 cm; 109 Grams
Date First Available ‏ : ‎ 29 April 2022
Manufacturer ‏ : ‎ FUNSHOWCASE
ASIN ‏ : ‎ B09RJ9J1SM
Item model number ‏ : ‎ 4430 4431
Country of Origin ‏ : ‎ USA
Manufacturer ‏ : ‎ FUNSHOWCASE
Item Weight ‏ : ‎ 109 g
Net Quantity ‏ : ‎ 1.00 count
Included Components ‏ : ‎ Case

You can pour as you like! Dried flowers, pearls, stencils, jewelry etc, you can add any element you like to DIY your own case cover such as cute stickers, hinge and jewelry chain, acrylic curb chains, crystal charm etc.
Use with asin B07D37NBT1 to make a resin clasp to add chain
The earphone cover creation can also be used as an organizer container, case for wireless or wired headphone, SD memory card storage box etc.
The smartphone stand mold is reserved a charging hole for you to charge your devices while using this stand. The circle design of bottom is able to clip the cable for reducing tangling problem. It’s convenient for you to watch video.The cell phone stand combines 2 parts, you may assemble before use
For crafts: modelling clay(air clay, paper clay, resin clay, polyclay, salt clay, metal clay, liquid clay, wood clay, foam clay etc.), resin(acrylic resin, epoxy resin, rethane resin, uv resin), concrete, cement, plaster, hot glue, soap, candle, wax, cold porcelain, playdough, mix media and more
Durable and reusable soft tray, transparent so that you can check the bottom when process project, easy to demold, gloss finish


There are no reviews yet.

Be the first to review “Resin Silicone Molds Earbuds Case and Phone Stand Epoxy Casting Craft Kit”

Your email address will not be published. Required fields are marked *

Good quality.The product is firmly packed.Good service.Very well worth the money.Very fast delivery.